Second Life doppelganger for Old Number Seven
So a while ago, I posted about a guitar that meatspace me has played from time to time for our SL gigs. You can find that post here. As it stands, Courtesan DeCuir has been after me for some time to get a new guitar. Courtesan is the Live Ambassador for OD Designs, who make some damn fine instruments. As I thought I may again be faced with meathead playing that guitar, I figured I’d commission OD to create an inwolrd inworld copy. I threw together some quick ideas, and sent them on to Ortho Vargas, the CEO of OD.
Well, as it turns out, OD was not interested in bringing a full custom job in house. However, Courtesan forwarded my inquiry to Reyrey Clawtooth of R & R Guitars. I knew Reyrey previously, as she often plays bass with Electric Brit, with whom I often share a stage. However, it had somehow previously escaped my attention that she was a guitar builder. My mistake.
Long story short, Reyrey took on the project, and delivered a guitar beyond my expectations, all at a very low price. Indeed, at a price about equivalent to a generic (though top quality) off-the-rack instrument.
Here is an excerpt from the original letter that started the project:
For whatever reason, I take some perverse pleasure in ensuring the guitar I play inworld is a close representation of the guitar being played by that other guy out in meatspace. The guitar I typically play inworld is a slightly modified KLP F512 — modified to be almost a dead ringer of the Guild F412 12-string jumbo acoustic in the RL.
I recently found myself controlled by that human while he was on the road. He doesn’t take his Guild on the road. Accordingly, it caused me some consternation to be stuck playing my KLP, while that human was playing a radiacally different axe.
It seems logical to assume that that guy will do this again in the future. So I’d like to acquire another doppleganger. The problem is that this second guitar is quite distinctive — a custom thingy. I’ve not seen anything like it inworld.
Accordingly, I’d like to explore the idea of commissioning a reproduction of the guitar in question. Of course, being your typical ignorant muso, I have no idea how much effort would go into such a thing, so I do not know where the cost/benefit analysis may pull me back to virtual earth. Perhaps I can describe it, and you can respond with what you may think practical.
So this is essentially an ‘acousticaster’:
- General body outline of a strat, though being fully hollow, it is not contoured in profile.
- Bookmatched spruce top, bookmatched maple back.
- 3 color sunburst top and back, dark (orangey-black) sides.
- Maple strat neck & fretboard, simple black dot inlays, small strat headstock shape.
- Figured rosewood headstock overlay with bird inlay.
- Bill Lawrence pu in neck position (picture a black strat pu, but with no visible polepieces)
- Oval soundhole
- fairly simple glued-on tortoise pickguard
- bridge is typical steel string acoustic construction – simple rounded rectangle, bridge pins, bone saddle
- three black strat-style knobs on upper bout – on the the edge or side rather than on the face
- back signed in black Sharpie by John Elway (the football guy) and Debbie Davies (the blues gal)
- pick rash on the topLet me know if you have any interest whatsoever in building such a thing. Maybe you can ballpark a L$ cost for various subsets of the above wish list. If you are interested I’ll have that human out in meatspace snap some shots of the physical guitar for your reference.
Again, see this post for the RL version.
And some pictures of the final result:
The happy artist with his new toy.
Detail from above
Even cloned Elway’s and Davies’ signatures!
Yup – slam dunk. Thanks Reyrey!
Edit 20091203 – spelling
I am very happy that the guitar meets (or even exceeds) your expectations. I build for the joy of building, hence the price mentioned above, and this has been one of my most satisfying builds, as it was a re-creation of a beloved instrument. Rock on, my friend, hope to see you playing it somewhere in SL soon.
Thanks again. Yes, I’m thinking it’ll now work its way into regular rotation.
I’ve so far been leaning on the 12-string for its bigger sound – it fills out more sonic space in the ‘guitar and voice plus occasional drum machine’ format. However, I’m working on a show with a slightly different format. This axe ought to work wonderfully for that.